JVC LYT2089-001D Manuel D’Utilisation
33
Applicable to: Full Auto shooting mode A, Manual shooting
mode M
mode M
Generally, the brightness of the subject that is being shot is
automatically adjusted according to the reference values of
the camera. However, the brighter or darker areas of an
image may appear unclear depending on the shooting
conditions. To prevent this from occurring, you can correct
the exposure manually.
automatically adjusted according to the reference values of
the camera. However, the brighter or darker areas of an
image may appear unclear depending on the shooting
conditions. To prevent this from occurring, you can correct
the exposure manually.
1 .
Set to the Manual Exposure mode.
Press AE±.
● The AE value appears on the screen, and the adjustment
mode is enabled.
(Control using the EV value when in the still picture mode.)
(Control using the EV value when in the still picture mode.)
2 .
Adjust the exposure.
Turn the ADJ./VOL. knob.
Turn upward to increase the value and make the image
brighter.
Turn downward to decrease the value and make the image
darker.
Turn upward to increase the value and make the image
brighter.
Turn downward to decrease the value and make the image
darker.
3 .
Confirm the setting value.
Press the ADJ./VOL. knob.
● The manual setting value is set. (The setting value (-6 to
+6) is displayed on the screen.)
4 .
After setting the value, press the ADJ./VOL. knob for
1 second or longer to switch to the AE Lock mode.
(An L mark appears after the setting value on the
screen.)
AE Lock: Locks the exposure setting value.
screen.)
AE Lock: Locks the exposure setting value.
䡵 Canceling AE Lock
Press the ADJ./VOL. knob for 1 second or longer.
● The mark disappears.
䡵 Disabling the Manual Exposure mode
● Press AE±.
Memo :
● AE Lock is canceled if the shutter speed or aperture is set
to the manual mode.
● When in the still picture mode, exposure cannot be
adjusted manually if shutter speed and aperture are set to
the manual mode. (The AE display flashes for about 5
the manual mode. (The AE display flashes for about 5
seconds on the screen and its setting becomes invalid.)
Applicable to: Full Auto shooting mode A, Manual shooting
mode M
Shortens the closeup distance at the tele (T) end of the
zoom.
(1 m B approx. 80 cm)
mode M
Shortens the closeup distance at the tele (T) end of the
zoom.
(1 m B approx. 80 cm)
There are two ways to set this feature.
䡵 Set [TELE MACRO] in the [CAMERA PROCESS] menu to
䡵 Set [TELE MACRO] in the [CAMERA PROCESS] menu to
䡵 Set [USER1], [USER2], or [USER3] in the [CAMERA
SETTINGS] menu to [TELE MACRO], then press the
corresponding USER button.
(Possible in Full Auto mode A and Manual mode M)
Assignment of USER buttons:(A Page 21, 65)
corresponding USER button.
(Possible in Full Auto mode A and Manual mode M)
Assignment of USER buttons:(A Page 21, 65)
● When the tele macro feature is turned on, a tele macro
icon appears on the screen.
Memo :
● Between the two methods above, setting via the USER
button is given a higher priority.
Adjusting the Exposure
Manually
Manually
AE
±0
AE Value
ADJ./VOL
ADJ./VOL
-6
AE Lock
Using the Tele Macro
Feature
Feature
ADJ./VOL
AE
DC
OPEN
REC
PUSH
IRIS
SHUTTER
AE ±
ADJ
./ V
OL.
CLOSE
ACCESS
ADJ./VOL.
Knob
Knob
AE±
18dB
ND
Tele Macro Icon
M9H7_EN_001D.book Page 33 Thursday, August 26, 2010 11:51 AM