JVC LYT2089-001D Manuel D’Utilisation

Applicable to: Manual shooting mode M

䡵 Set to the Manual shooting mode.

Displays the color bar on the screen and starts recording in 
this state. (See below)

There are two ways to display the color bar.
䡵 Set [COLOR BAR] in the [CAMERA PROCESS] menu to 

[ON]. (A Page 61)

䡵 Set [USER1], [USER2], or [USER3] in the [CAMERA 

SETTINGS] menu to [COLOR BAR], then press the 
corresponding USER button.
Assignment of USER buttons: (A Page 21, 65) 
● The color bar appears.

● Between the two methods above, setting via the USER 

button is given a higher priority.

● When in the Full Auto shooting mode, the color bar will not 

appear.

䡵 Clearing the color bar display

Set the [COLOR BAR] menu to [OFF].
Alternatively, press the USER button that is set as 
[COLOR BAR].

Applicable to: Full Auto shooting mode A, Manual shooting 
mode M

The picture quality of the camera can be set using the 
[CAMERA PROCESS] menu.
Adjustment screens are displayed for the following items in 
the [CAMERA PROCESS] menu.
As the adjustments are shown on the screen, you can adjust 
the values while checking the picture quality on the camera.

䡵 DETAIL LEVEL
䡵 DETAIL V/H BALANCE
䡵 GAMMA LEVEL
䡵 COLOR GAIN
For details of the respective items, see the [CAMERA 
PROCESS] menu. (A Page 59)

Example: DETAIL LEVEL

Push the Set Lever to the left or right.

● Doing so moves the slide bar in the same direction. The 

detail level of the camera image changes according to the 
movement along the slide bar.

Press the center of the Set Lever.

● The menu screen closes.

● When the setting values of the [GAMMA], [COLOR 

MATRIX], and [KNEE] items in the [CAMERA PROCESS] 
menu are altered, the change is reflected instantly on the 

screen. (A Page 59)

䡵 Recording the color bar
When the [SYSTEM SELECT], [REC MODE] menu is as 

below, the color bar can be recorded.

䡵 On-screen display on the external monitor
If the [SYSTEM SELECT] menu is set to [720-**], the on-
screen display will appear as usual when the color bar is 
output on the external monitors below. ([DISPLAY ON TV] 
setting in the [CONNECTION SETTINGS] menu is invalid.)

● A/V OUT terminal

● D1 (480i/576i) output of COMPONENT OUT terminal

● 480i/480p/576i/576p output of HDMI terminal

SYSTEM SELECT

REC MODE

1080-60/30

1920/60i(HQ), 1920/30p(HQ)

1080-50/25

1920/50i(HQ), 1920/25p(HQ)

720-60/30

1280/60p(HQ), 1280/60p(SP)

720-50/25

1280/50p(HQ), 1280/50p(SP)

Slide Bar

Detail Icon

M9H7_EN_001D.book  Page 39  Thursday, August 26, 2010  11:51 AM