IBM 380 (2635) Manuel D’Utilisation
Error Messages
Messages generated by the software—the operating
system or application programs—generally are text
messages, but they also can be numeric. The following
are the various error messages.
system or application programs—generally are text
messages, but they also can be numeric. The following
are the various error messages.
POST beep codes
POST error messages
Diagnostic error messages
Software generated messages
Multiple messages
Error Message
Description
POST Beep Codes
Sounds emitted from the
speaker if POST finds a
problem. One beep
indicates POST completed
successfully. Multiple
beeps indicate a problem
was found by the POST.
speaker if POST finds a
problem. One beep
indicates POST completed
successfully. Multiple
beeps indicate a problem
was found by the POST.
POST Error Messages
Displayed when POST
detects hardware or
configuration problems.
detects hardware or
configuration problems.
Diagnostic Error Messages
Displayed when a test
program finds a hardware
problem.
program finds a hardware
problem.
Software Generated Error
Messages
Messages
Displayed if a problem or
conflict is found by an
application program, the
operating system, or both.
For an explanation of these
messages, refer to the
information supplied with
that software package.
conflict is found by an
application program, the
operating system, or both.
For an explanation of these
messages, refer to the
information supplied with
that software package.
Multiple Messages
The first error that occurs
can cause additional errors.
Always follow the suggested
action instructions for the
first error message
displayed.
can cause additional errors.
Always follow the suggested
action instructions for the
first error message
displayed.
Return Codes
For the test programs to properly determine if a test
Passed
,
Failed
, or
Aborted
, the test programs check the
error-return code at test completion. To register the test
properly in the test log, the test programs must generate
one of the following return codes:
properly in the test log, the test programs must generate
one of the following return codes:
Return Code
Description
0
Indicates device passed its test.
1
Indicated device failed its test.
2 or greater
Indicates test stopped or aborted.
ThinkPad 365 (2625)
53