New Balance 1500 Manuel D’Utilisation

18

DOT MATRIX: The 8 x 10 dot matrix reflects Incline
on the Elevation Programs (Programs 1-4) and
Speed on the Speed Programs (Programs 5-6)
and the User Programs. In the Manual Mode,
the dot matrix displays a 1/4 mile running track.
Manual Mode shown above.

DISTANCE: Displays the 
Distance, in miles or 
kilometers, the Treadmill 
Belt has gone on the 
current workout.

SPEED: Displays the Speed
the Treadmill Belt is moving.

INCLINE/PULSE: Displays pulse
rate except when elevation 
is changed or SELECT key is
pressed. To get a pulse rate,
place both of your hands 
on the Pulse Grip Bars. It is
recommended to straddle
the Walking Belt to get an
accurate reading. If you 
are walking or jogging, it is
difficult for the Computer 
to accurately read your 
pulse rate. (See page 22 
for more details.)

TIME: Shows workout Time. Time begins at 00:00 and counts up.
The maximum time is 99:59. When the Safety Key is first attached
to the Computer, this display shows the accumulated Distance
(odometer) for one second.

Odometer: An Odometer showing accumulated distance
will appear in the Time window for one second when the
Safety Key is placed on the Computer.

Time-Out: If the Treadmill is turned on, and the Belt is not
moving, the Computer will shut-off after five minutes.

Re-Start: If the Treadmill is stopped during use,
when the START button is pressed again, the
Treadmill will ramp-up the speed to where it
was stopped. If the Treadmill is stopped for 5
minutes or more, POWER is lost and the 
Treadmill will have to be re-started.

CALORIES/ELEVATION GAIN: Displays Calories 
consumed. To display Elevation, in feet, the user 
has climbed during the current workout, press
SELECT and the value will display for three 
seconds. The Calorie Calculation is based on 
a 150 pound person.