Avaya 2050 Manuel D’Utilisation
Page 28 - DSS Keys
BLF Status Lamps
BLF Status Lamps
The DSS keys on 2050 & 2060 phones incorporate dual-colour BLF lamps. These
show the status of the number stored under the DSS key.
Red BLF Lamp Signals: Calls to/from other extensions.
Red BLF Lamp Signals: Calls to/from other extensions.
• Slow Flash: Call on line parked at another extension.
• Fast Flash: Extension ringing.
• Long On/Short Off: Extension or line busy.
• Solid: Extension or line disconnected.
Green BLF Lamp Signals: Calls to your extension.
• Fast Flash: Extension ringing.
• Long On/Short Off: Extension or line busy.
• Solid: Extension or line disconnected.
Green BLF Lamp Signals: Calls to your extension.
• Slow Flash: Call on line parked at your extension.
• Fast Flash: External call ringing your extension.
• Solid: Call connected or held at your extension.
Alternate Green/Red Lamp Signal: Pilot Number.
• Fast Flash: External call ringing your extension.
• Solid: Call connected or held at your extension.
Alternate Green/Red Lamp Signal: Pilot Number.
• Slow Flash: Caller ringing pilot number.
DSS Key Label
Next to the DSS keys is a label. You can remove the label cover to write on the card
below. You can also remove the label cover under the handset using the same
method (it has a single pin hole on the bottom edge).
To remove the label cover:
1. Insert a fine but not sharp point (e.g. end of a paper-clip) into one pin hole.
To remove the label cover:
1. Insert a fine but not sharp point (e.g. end of a paper-clip) into one pin hole.
Squeeze the label to the right.
2. Repeat with the other pin hole.
3. Lift the label cover clear and remove the card insert.
To replace the label cover:
1. Replace the card insert.
2. Slide the tabs on the right-hand edge of the label cover into their slots.
3. Bow the label cover to slip the tabs on the left-hand edge of the label cover into
3. Lift the label cover clear and remove the card insert.
To replace the label cover:
1. Replace the card insert.
2. Slide the tabs on the right-hand edge of the label cover into their slots.
3. Bow the label cover to slip the tabs on the left-hand edge of the label cover into
their slots.
DSS Key Label Template
A template for printing DSS key labels exists. It can be used with Word for Windows
6 or 7. Contact your System Manager for a copy of the template, alternatively you
can obtain it from the Avaya internet site
http://support.avaya.com
and/or from the
CD supplied with the handset.
To use the template:
To use the template:
1. Copy the file DSSKEYUK.DOT into the Word template directory, i.e. the
directory containing other .DOT files (this varies according to the version of
Word and other Microsoft programs that you use, typically it is the WINWORD
or TEMPLATE directory).
2. Start Word. Select File and then New.
3. From the list of templates select DSSKEYUK.
4. Follow the instructions included within the template.
3. From the list of templates select DSSKEYUK.
4. Follow the instructions included within the template.
Page 28 - DSS Keys
INDeX 10.0 2030/50/60 User's Guide
BLF Status Lamps
38DHB0002UKFN Issue 2 (07/2002)