Spectralink E340 Manuel D’Utilisation

SpectraLink Corporation 

Configuration and Administration—NetLink e340/i640 Wireless Telephone 

 

Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 

Push-to-talk

: The NetLink i640 Wireless Telephone incorporates PTT functionality. 

PTT may be allowed or disallowed in the Admin menu. If allowed, the user may 
enable or disable locally, and may set the channel, tone volume and audio volume. 
The menu for push-to-talk does not appear if PTT is disallowed on the Admin menu 
or if no channel is enabled on the Admin menu. 

 

Channel  

Enable/Disable 

Audio Volume 

Tone V olume 

 

OK 

  Up 

Channel

: The user may enable any PTT channel that has been allowed in the Admin 

menu by entering the corresponding number from the keypad. If PTT has been 
enabled in this handset, the default channel is the lowest allowed channel as set in 
the Admin menu. 

 

Current Channel: X 

1 2 3 4 5 6 7 8 

New Channel = ? 

 

 

 

 

Up 

Enable/Disable: 

The user may enable or disable PTT on this handset. PTT is disabled 

by default. 

 

PTT Enabled 

PTT Disabled 

 

 

OK     Up 

Audio Volume, Tone Volume

: The user may select volume levels by pressing the 

Up

 and 

Down

 side buttons and then pressing the 

OK

 softkey. The graduated volume bar 

indicates the levels. The Audio Volume setting may be overridden by adjusting 
volume while the handset is in a push-to-talk call. 

 

If PTT is allowed in the Admin menu and enabled by the user, Battery 
Pack life when the handset is in standby mode is decreased to about 30 
hours. 

PN: 72-1084-02-E.doc 

Page 30