Mitsubishi Electronics HS-HD2000U Manuel Du Propriétaire
53
Copying a Tape from Analog to Analog
There are two basic ways to make a copy of a tape from analog to analog.
One way is to use the HS-HD2000U to record and another VCR for playback.
The other way is to use another VCR to record and use the HS-HD2000U for playback.
One way is to use the HS-HD2000U to record and another VCR for playback.
The other way is to use another VCR to record and use the HS-HD2000U for playback.
Regardless of which method you may choose, you will need one RCA audio cable and one S-video cable to connect the
two VCRs. You can use either a standard RCA video cable or an S-video cable. If you do not have these cables, they
are available at your local electronics dealer. The highest quality is achieved through an S-video cable.
two VCRs. You can use either a standard RCA video cable or an S-video cable. If you do not have these cables, they
are available at your local electronics dealer. The highest quality is achieved through an S-video cable.
VIDEO IN 2 L/MONO-AUDIO IN 2 -R
S VIDEO IN 2
L
R
L
R
HS-HD2000U RECORDING
PLAYBACK
VIDEO IN
AUDIO IN L
AUDIO IN R
S-VIDEO IN
AUDIO OUT L
VIDEO OUT
AUDIO OUT R
S-VIDEO OUT
Use either a video cable or an S-video cable.
Do not use both.
Do not use both.
Using the HS-HD2000U to Record from Another VCR
1
Connect the audio cable to AUDIO OUT L and R on
the playback VCR and to AUDIO IN L and R on the
HS-HD2000U. If the playback VCR is mono, use
only the AUDIO IN L on the HS-HD2000U.
the playback VCR and to AUDIO IN L and R on the
HS-HD2000U. If the playback VCR is mono, use
only the AUDIO IN L on the HS-HD2000U.
2
If the playback VCR is S-VHS, connect an S-video
cable to S-VIDEO OUT on the playback VCR and to
the S-VIDEO IN on the HS-HD2000U.
cable to S-VIDEO OUT on the playback VCR and to
the S-VIDEO IN on the HS-HD2000U.
If the playback VCR is standard VHS, connect a
video cable to VIDEO OUT on the playback VCR
and to the VIDEO IN on the HS-HD2000U.
video cable to VIDEO OUT on the playback VCR
and to the VIDEO IN on the HS-HD2000U.
3
If the playback VCR is Hi-Fi, set the audio monitor to
Stereo.
Stereo.
4
Use INPUT to set the HS-HD2000U to External 1
(L1) if you used the HS-HD2000U rear panel jacks,
or External 2 (L2) if you used the HS-HD2000U
front panel jacks.
(L1) if you used the HS-HD2000U rear panel jacks,
or External 2 (L2) if you used the HS-HD2000U
front panel jacks.
5
Put a blank tape into the HS-HD2000U. If you are
recording in S-VHS, be sure to use an S-VHS tape.
recording in S-VHS, be sure to use an S-VHS tape.
Make sure that the S-VHS record or S-ET record in
the S-VHS Set-Up menu is set correctly. See page
32, Selecting Recording Format.
the S-VHS Set-Up menu is set correctly. See page
32, Selecting Recording Format.
Make sure that the Front S-input or Rear S-input in
the S-VHS Set-Up menu is set correctly. See page
33, Selecting S-input Setting.
the S-VHS Set-Up menu is set correctly. See page
33, Selecting S-input Setting.
6
Put the tape you want to copy into the playback VCR
and find the cue point. Press STOP if the picture
starts playing.
and find the cue point. Press STOP if the picture
starts playing.
7
On the HS-HD2000U, press REC, then PAUSE.
8
On the playback VCR, press PLAY, then PAUSE.
9
Press the PAUSE buttons on both VCRs at the same
time to begin copying the tape.
time to begin copying the tape.
10 When finished, press STOP on both VCRs.
Editing Features