3com 09-1632-000 Manuel D’Utilisation

Page de 39
 
6
 
C
 
ONFIGURING
 
 Y
 
OUR
 
 O
 
FFICE
 
C
 
ONNECT
 
 NETB
 
UILDER
 
 10 B
 
RIDGE
 
/R
 
OUTER
 
The instructions in this guide describe how to configure 
Office A. After you’ve completed the configuration for 
Office A, the same configuration steps need to be 
performed at Office B. 
This guide has the following sections:
 
 
Prerequisites
 
 
Preconfiguration Set Up (which includes installing the 
OfficeConnect hardware)
 
 
Configuration Procedure
 
Prerequisites
 
Before you begin installing and configuring your 
OfficeConnect bridge/router, you must satisfy the following 
prerequisites:
 
 
You must have a PC on your network that will function 
as your network management station (NMS). 
 
 
This NMS must have browser software that is 
compatible with Web Link: either Netscape Navigator 
4.08 or later, or Microsoft Internet Explorer 4.01 or 
later. 
 
Web Link is the web-based network management 
application that comes with your OfficeConnect 
NETBuilder bridge/router.
 
 
You need to obtain IP addresses and subnet masks for 
your network.
 
 
You will also need to order a leased line and an ISDN 
line from your telco provider or providers. 
 
When your ISDN line is installed you will receive 
information regarding the ISDN dial numbers, ISDN 
switch type, and SPID numbers. Retain this information 
for use during configuration.
 
OC10.book  Page 6  Thursday, May 13, 1999  2:33 PM