Clifford 570.4X Manuel D’Utilisation

Using the 1 way companion remote

The companion 1 way remote commands the system features as
shown in the previous table, but without the message display of the
Responder LC remote. Siren chirps and parking light ﬂashes are used
to indicate that a command has been received and activated as de-
scribed in the Basic and Advanced command sections.

Accessing Commands

Similar to the Responder LC remote, Basic commands are performed
when a command button is pressed directly. To perform Advanced
Commands press the

button 1 to 4 times to access function lev-

els,

x4 in the table for example implies pressing

4 times. The

LED ﬂashes in groups for a few seconds to indicate the level. Press
the desired command button while the LED is ﬂashing to perform the
command.

Button Auto Lock

When On, the remote control buttons lock if more than 20 seconds
lapses between button presses. If a button is pressed when locked, a
fault tone is emitted. To unlock the buttons; press the

button followed

by the

button, the buttons unlock and tones play to conﬁrm.

Car Select

Car 2

must ﬁrst be turned On (See Remote Features menu under “Pro-

gramming” on page 45 to turn on). Press and hold the

button

for 3 seconds. The remote ﬂashes the LED and beeps once or twice to
indicate the selected Car is 1 or 2, release the button for Car Select
or continue to hold for programming.

Release the

button, then press and release while the LED and

beeps continue to perform Car Select. Once the car is selected a com-
mand can be performed by pressing one of the command buttons.