Mega System Tech iCV-02 Manuel D’Utilisation

After you have setup the hardware and set an IP address for iCAMView, you will then 
be able to go to iCAMView web site to monitor and control the PC cameras. All you 
have to do is enter the new IP address into any web browser. 

 

1.  Start the Web Brower (Netscape or Internet Explore) 

 

2.  Enter the iCAMView IP Address that was set earlier using “Setup Wizard” (e.g. 

192.168.0.30, if you do not remember, goto to iCAMView and look at the LCD 
display) and press ENTER 

 

 

Fig.13.  Enter iCAMView IP address 

3.  A login screen will appear.    Enter the Administrator User Name and Password if 

you have set these in the “Setup Wizard”.    Otherwise, just press ENTER. 

 

 

Fig.14.  iCAMView Login screen 

 

The iCAMView webpage main menu is divided into two sections. The selection menu 
on the left and display menu on the right. The selection menu consists of the following 
options: