Panasonic PT-LM1U Manuel D’Utilisation
E
NGLISH
-27
Useful
functions
26-E
NGLISH
Correcting keystone distortion and
automatic positioning (AUTO SETUP)
automatic positioning (AUTO SETUP)
This projector detects its degree of tilt and the input signal. Keystone
distortion and the position of the image can then be corrected automatically
in accordance with the input signal.
distortion and the position of the image can then be corrected automatically
in accordance with the input signal.
Turning off the picture and sound
momentarily (SHUTTER)
momentarily (SHUTTER)
The “SHUTTER” function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in “SHUTTER” mode than it does
in normal projection mode.
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in “SHUTTER” mode than it does
in normal projection mode.
ENTER
FREEZE
SHUTTER
INDEX
WINDOW
PROJECTOR
VOLUME
D.ZOOM
STD
VIDEO
INPUT
POWER
RGB
MENU
AUTO
SETUP
ENTER
FREEZE
INDEX
WINDOW
PROJECTOR
VOLUME
D.ZOOM
STD
VIDEO
INPUT
POWER
RGB
MENU
AUTO
SETUP
SHUTTER
ENTER
INDEX
WINDOW
PROJECTOR
VOLUME
D.ZOOM
STD
VIDEO
INPUT
POWER
RGB
MENU
AUTO
SETUP
SHUTTER
FREEZE
Projector control panel
Press the AUTO SETUP button.
(When the projected image has caused keystone distortion)
(When the projected image has caused keystone distortion)
B Automatic positioning
will be carried out.
Still picture
Screen
Projected
image
image
B The picture being projected will be paused.
B Press the FREEZE button again to cancel the
B Press the FREEZE button again to cancel the
still picture.
[
NOTE:
B When RGB signals are being input, “DOT CLOCK”, and “CLOCK
B When RGB signals are being input, “DOT CLOCK”, and “CLOCK
PHASE” will be adjusted automatically in addition to keystone distortion
and the position of the image being corrected (except when the dot
clock frequency is 100 MHz or higher). Refer to page 38 for details.
and the position of the image being corrected (except when the dot
clock frequency is 100 MHz or higher). Refer to page 38 for details.
B If the edges of the projected image are indistinct, or if a dark picture is
being projected, the automatic setup processing may stop automatically
before it is complete. If this happens, project a different picture and then
press the AUTO SETUP button again.
before it is complete. If this happens, project a different picture and then
press the AUTO SETUP button again.
B Set “AUTO KEYSTN” in the “OPTION1” menu to “OFF” to prevent any
deterioration of the picture as a result of keystone correction. (Refer to
page 42.)
page 42.)
Press the SHUTTER button.
B The picture and sound will be turned off.
B Press any button on either the projector or
B The picture and sound will be turned off.
B Press any button on either the projector or
remote control unit to return to normal operating
mode.
mode.
Press the FREEZE button.
NOTE:
B “SHUTTER” on the “MAIN MENU” is the same
B “SHUTTER” on the “MAIN MENU” is the same
function.
Pausing a picture (FREEZE)