Adtran 616 Manuel D’Utilisation

Total Access 600 Series System Manual

Section 4  User Interface Guide

61200624L1-1B

© 2004 ADTRAN, Inc.

95

Shows the user the physical and logical port associated with each DLCI. This is a read-only field.

This DLCI (Data Link Connection Identifier) number identifies the virtual circuit being configured.

The mode identifies how the data will be forwarded. The choices are: 

This value is expressed in milliseconds and represents the amount of time the unit will stop transmitting 
over a PVC which received a packet with the BECN bit set. Range is 

 msec; the default is

 

.

View the L2 protocol status for the T1 interface using the Frame Relay protocol.

View the Frame Relay statistics on the WAN port.

Integer used for identifying DLCIs on an interface. A single DLCI will always be port index 0. Subsequent 
DLCIs will have incrementing port indices.

Displays “up” when the unit is communicating with the Frame Relay switch; otherwise displays “down”.

Total frames transmitted out the WAN port.

Total frames received from the WAN port.

Total bytes transmitted out the WAN port.

Total bytes received on the WAN port.

All IP data for this DLCI will be routed.

All data for this DLCI will be bridged.

All IP data will be routed. All other data will be bridged.