Toshiba IP5000-UG-VC Manuel D’Utilisation

2.

In the SoftIPT Configuration window, enter the following: 

Phone No.

This is the SoftIPT extension.

Password

Password for IP user mobility

Node

The node ID where the MIPU resides. By default, leave blank.

Outgoing prefix

When a call is made using the SoftIPT directory, SoftIPT 
automatically attaches the outgoing prefix for local calls, or long-
distance prefix for long-distance calls, respectively. See 

 for details.

Long distance prefix

IP address of IPU

SoftIPT tries to connect to the IPU using the following addresses 
in turn:

•

Primary IPU IP address

•

Secondary IPU IP address.

If Broadcast is selected, SoftIPT tries to search for the IPU by 
sending broadcast messages, otherwise, it goes back to the 
Primary IPU IP address. SoftIPT skips the Primary IPU IP address 
or the Secondary one if it is not set. In either case, if SoftIPT 
successfully connects to the IPU, the IPU IP address is shown in 
the “Connected IPU IP Address” field. See your System 
Administrator for IPU address.

If Broadcast is selected, the broadcast message is sent on the 
same subnet, which means SoftIPT can connect to the IPU on the 
same subnet using Broadcast mode without designating the IPU 
IP address. However, in some PC environments, SoftIPT cannot 
complete this broadcast registration sequence because the lower 
network module does not notify SoftIPT, through Windows, of 
receiving a reply message after sending a broadcast message. 
Therefore, Toshiba recommends using Manual mode if SoftIPT 
cannot find the IPU by Broadcast.

Network

If there are multiple network adapters, select the one for SoftIPT.