Fujitsu V3.1 Manuel D’Utilisation
Configuration using the Remote Manager
You can also configure the network parameters of the I/O connection blades
using the Remote Manager of the management blade.
using the Remote Manager of the management blade.
You configure the network parameters of an I/O connection blade as follows:
l
In the Remote Manager, choose (1) Management Agent – (6) Con-
nection Blade.
nection Blade.
l
Select an I/O connection blade.
l
Make the relevant entries for the following parameters
o
IP Mode Setting Value
o
IP Address Setting Value
o
Subnet Mask Setting Value
o
Gateway Setting Value
l
Activate the settings by clicking Apply Network Setting.
ServerView Virtual-IO Manager
103
4.1 Configurations on the managed BX600 Blade Server