Pelco C623M-C Manuel D’Utilisation

C623M-C (3/05)

75

The DX8000 delivers a line-level monaural signal through a standard 0.125-inch phone jack on the rear panel of the DVR. It is recommended that 
the audio output of the DX8000 be connected to an amplifier in order to boost the output signal to a level that is sufficient to drive a speaker. 
Figure 85 illustrates an example of an audio output configuration.

1. Connect the audio output of the DX8000 to an audio amplifier.

2. Connect the audio amplifier to a speaker.

Figure 85.  Audio Output Configuration Example

NOTE:  Some speaker systems integrate both amplifiers and speakers in a single unit. Such a system can be connected directly to the 
audio output of the DX8000 without the need for external amplification.

NOTE:  Use an audio cable with a 0.125-inch miniature male phone plug on one end to connect to the audio output of the DX8000. Ensure 
that the opposite end of the cable has the appropriate connectors for connection to your amplifier.

SPEAKER

MINI MALE PHONE PLUG

AUDIO AMPLIFIER