Avaya 1200 Manuel D’Utilisation

Connect a CAT5e PC Ethernet cable between your Avaya 1200 Series IP 
Deskphone and your computer to enable your computer to access the 
LAN.

1.

Plug one end of the PC Ethernet cable (not supplied) into the PC 
Ethernet port on the back of your IP Deskphone as shown in 

.

2.

Thread the cable through the channel in the foot stand (if installed).

3.

Connect the other end of the cable to the LAN port on your PC.

You can mount your Avaya 1200 Series IP Deskphone on a wall.  Wall-
mount the IP Deskphone using the two keyholes on the back of the it. You 
do not need the foot stand for wall-mounted applications.

1.

Remove the foot stand, if already attached.

2.

Ensure all cables are properly routed and the IP Deskphone is 
functioning.

3.

Make small marks on the wall where you want to align each keyhole 
slot.

4.

Insert the screws (not provided) so that they protrude slightly from the 
wall.

5.

Align the keyholes on the back of the IP Deskphone with the screws 
in the wall.

6.

Slide the IP Deskphone onto the screws to secure it in position.

You can use combinations of the letters and numbers on the dialpad of 
your IP Deskphone to enter SIP addresses, create Address Book entries, 
and to designate labels for programmable keys.