Samsung BD-E5300 Manuel D’Utilisation

Setup

1.  Turn on your TV after connecting the 

player. 

When you connect the player to a TV for the 

first time, the player turn on automatically 

and the Initial Settings screen appears.

 

 Move  " Select

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

English
Français
Deutsch
Español
Italiano
Nederlands

2.  Use the ▲▼ buttons on the remote to 

select the desired language, and then 

press the ENTER button. 

3.  Press the ENTER button to select Start.
4.  Use the ▲▼ buttons to select an Aspect 

Ratio, and then press the ENTER button.  

5.  Select Auto, and then press the ENTER 

button. If you do not have a home 

network, press the BLUE (D) button on 

your remote. You will go directly to the 

Home menu.

6.  The Blu-ray player automatically verifies 

your wired network. When verification 

in complete, the screen displays “Your 

network is operating properly.” Press the 

ENTER button. 

7.  The “Initial settings completed.” message 

appears, and then the Home screen 

appears.  

 

 

- If you Blu-ray player does not connect to your  

  network or you want to connect manually, go to  

  Network Setup on page 16.

✎

 

NOTE 

 ▪ The Home menu will not appear if you do not 

configure the initial settings except as noted 

below.

 ▪ If you press the BLUE (D) button during network 

setup, you can access the Home menu even if 

the network setup is not completed yet.

 ▪ When you return to the Home menu, the full 

screen mode is cancelled automatically.

 ▪ If you want to display the Initial Setting screen again 

to make changes, press the PLAY/PAUSE (   ) 

button on the front panel of the player for more than 

5 seconds with no disc inserted. This resets the 

player to its default settings.

 ▪ If you use an HDMI cable to connect the player 

to an Anynet+(HDMI-CEC)-compliant Samsung 

TV and 1.) You have set the Anynet+(HDMI-

CEC) feature set to On in both the TV and 

the player and 2.) You have set the TV to a 

language supported by the player, the player will 

select that language as the preferred language 

automatically.

 ▪ If you leave the player in the stop mode for more 

than 5 minutes without using it, a screen saver 

will appear on your TV. If the player is left in the 

screen saver mode for more than 25 minutes, 

the power will automatically turn off.

HOME Button : Press to move to the Home 

menu.

RETURN Button : Return to the previous 

menu.

ENTER / DIRECTION Button : 

Move the cursor or select an item. 

Activate the currently selected item.

Confirm a setting.

EXIT Button : Press to exit the current 

menu.

•  Home Menu

YouTube

Videos

No Disc  a Change Device  

View Devices 

Enter

Selects Videos.

Selects YouTube.

Selects Photos.

Selects Music.

Selects Settings.

Displays the buttons you can use on the 

remote to access functions.

To access the Settings menu and sub-menus, 

follow these steps:
1.  Press the POWER button.

The Home Menu appears.

2.  Press the ◄► buttons to select Settings, 

and then press the ENTER button.

3.  Press the ▲▼ buttons to select the 

desired submenu, and then press the 

ENTER button.

4.  Press the ▲▼ buttons to select the desired 

item, and then press the ENTER button.

5.  Press the EXIT button to exit the menu.

✎

 

NOTE 

 ▪ The access steps may differ depending on the 

menu you selected. The OSD (On Screen Display) 

may change in this player after you upgrade the 

software version.