Pelco C2669M Manuel D’Utilisation
C2669M (4/07)
7
Auto Login
The DVR5100 comes with four pre-defined user profiles: Administrator, Manager, Operator, and Guest. The first time you start the DVR5100, the
system automatically logs in using the admin user after 60 seconds if an operator does not select a specific user at the login screen. This feature
allows the system to automatically log in as the designated user each time the DVR is rebooted (for example, after a power failure or when the
unit is restarted for any purpose). You can enable or disable the feature from the System Configuration screen. In addition, you can choose a
specific user for subsequent log ins.
system automatically logs in using the admin user after 60 seconds if an operator does not select a specific user at the login screen. This feature
allows the system to automatically log in as the designated user each time the DVR is rebooted (for example, after a power failure or when the
unit is restarted for any purpose). You can enable or disable the feature from the System Configuration screen. In addition, you can choose a
specific user for subsequent log ins.
NOTE:
As a security precaution, you should change the user ID for auto-login as part of the configuration and setup process. Consider selecting
Guest as the default user ID or create a new user ID and password with limited access. Using a Guest user assures that system settings are not
accessible inadvertently.
accessible inadvertently.
Figure 3.
Auto Login Menu
Table B.
Default User IDs and Passwords
User ID
Password
admin
admin or 23646
manager
manager or 6262437
operator
operator or 67372867
guest
guest or 48378