Akai LCT3785TA Manuel D’Utilisation

Page de 44
10
Sketch map
  Push the power switch (O: Off, I: On).
  Use the power cord connect to an earthed 120V, 60Hz AC outlet.
  Signal input and other terminals:
 
ANT1 & ANT2: 75Ω Coaxial connector for Antenna/Cable Network.
   
Note: ANT 1 is for ATSC (DTV), and ANT 2 is for NTSC. (Refer to page 16.)
 
OPTICAL OUTPUT: Connect the optical output to the optical input connector of the Amplifier. 
   
(Only for DTV)
 
RS-232: The D-SUB 9 Pins terminal is used as a control port for serial communication between
      PC and Panel. (Only for after-sales service & DTV)
 
Audio Output: Connect audio amplifier or other TV set that with audio input.
 
HDMI INPUT: For high quality picture display purposes. Connects to HDMI or DVI (with DVI to 
     HDMI Adapter-not provided) digital output connector of the DVD or HDTV Set-top box.
 
D-Sub (VGA) INPUT: For PC display purposes. Connects to the Mini D-Sub 15 Pins analog
      output connector of the PC display card.
 
VGA/DVI AUDIO INPUT: Connect the audio input terminal to the audio output terminal of DVD 
     or HDTV Set-top box with VGA/DVI output terminal.
 
YPbPr (COMP1) INPUT: Connect the Component video input terminal to the Component output 
   
terminal of the video output device.
   
YPbPr (COMP1) Audio INPUT: Connect the audio input terminal to the audio output terminal 
   
of the video output device. 
 
YPbPr (COMP2) INPUT: Connect the Component video input terminal to the Component output
      terminal of the video output device.
    
YPbPr (COMP2) Audio INPUT: Connect the audio input terminal to the audio output terminal 
   
of the video output device. 
 
S-Video INPUT: Connects to the S-Video out jack of your VCR or other video equipment that
      has S-Video.
   
S-Video Audio Input: Connect the audio input terminal to the audio output terminal of the 
   
S-Video output device.
 
Video Input: Connect the component video input terminal to the video output terminal of the 
     video output device.
   
Video Audio Input: Connect the audio input terminal to the audio output terminal of the Video
    
output device.
4.3 Rear View
REAR VIEW
REMOTE CONTROL