Turbosound TQ-315DP Manuel D’Utilisation

 

1.

 

AUX connection – RS232 port used for updating settings or firmware. 

2.

 

Signal link – lockable 3-pin XLR line input socket connects to audio mixer. Fully balanced, 
pin 2 Hot, pin 3 Cold and pin 1 not connected. 

3.

 

Signal link – lockable 3-pin XLR line output socket connects to additional cabinets. Fully 
balanced, pin 2 Hot, pin 3 Cold and pin 1 not connected. 

4.

 

Mode switch – used to change the low frequency tuning when used with QLight™ series 
subwoofers or for stand-alone operation. 

5.

 

Power – blue LED indicates when AC power is applied to the amplifier module. 

6.

 

Limit (low) – red LED used to indicate LF limiting, self test and protection. 

7.

 

Limit (high) – red LED used to indicate MF/HF limiting, self test and protection. 

8.

 

Fuse – AC line fuse. Replace only with 10A 230V anti-surge fuse. 

9.

 

Power – Blue LED indicates when AC power is applied to the unit. 

10.

 

AC Mains connection – accepts Neutrik PowerCon® 3-pin cable-end connector. 

1

2

3

4

9

10

8

5

6

7