LOEWE 32959022 Manuel D’Utilisation

Page de 64
- 8
For your own safety and to prevent unnecessary damage to your device, 
read and comply with the following safety instructions:
Proper use and environmental conditions
This  TV  set  is  designed  exclusively  for  reception  and  reproduction  of
video and audio signals and is designed for living rooms or office facilities,
and  should  not  be  operated  in  rooms  with  high  humidity,  such  as  a
bathroom, or sauna, or where there is a high concentration of dust (e.g.
workshops). The manufacturer‘s warranty is only valid for use in the specified
permissible environment.
If the set is used outdoors ensure that it is protected against moisture
(rain, splashing water, or dew). High humidity and dust concentrations
cause leak currents in the device, which can cause a shock hazard if the
device is touched, or a fire.
If you have brought the set into a warm
environment from the cold, then wait
for about 1 hour before switching it on
to avoid formation of condensation.
Do  not  place  any  objects  filled  with
liquid or burning candles on the device.
Protect  the  set  against  dripping  and
splashing water.
Never  place  the  TV  set  in  a  position
where it is exposed to vibrations. This
can lead to material overload.
Transporting
Only transport the device in vertical position. Grasp the device on the
upper and lower edges of the housing.
The LCD screen is made of glass or plastic and can break if not handled
properly.
If the LCD screen is damaged and liquid crystal escapes, wear rubber
gloves when moving the device. In the case of skin contact immediately
wash thoroughly with water.
Power supply
The wrong voltage can damage the set. This equipment must only be
connected to a mains power supply which has the same voltage and
frequency  as  that  specified  on  the  rating  plate;  use  the  mains  cable
provided. The mains plug of the TV set must be easily accessible so that
the device can be disconnected from the mains at any time. When you
unplug the mains plug, do not pull on the cable rather pull on the plug
housing. The cable in the mains plug could be damaged and cause a
short circuit the next time it is plugged in.
Lay out the mains cable in such a manner that it cannot be damaged.
The mains cable must not be kinked or laid over sharp edges, stepped
on or exposed to chemicals; The latter also applies for the entire equip-
ment. A mains cable with damaged insulation can cause electrical shock 
and is a fire hazard.
Air circulation and high temperatures
The vent slots on the rear panel of the set must always be kept free.
Please do not place newspapers or cloths on/over the TV.
Ensure that there is at least 10
cm free space on the sides and
above the set for air circulation,
if the set is placed in a cabinet
or on a shelf.
Like any electronic device, your
TV set requires air for cooling.
Obstruction  of  the  air  circula-
tion can cause fires.
The set is suitable for different
installation  solutions.  See  the
instructions for assembly for the different installation solutions.
Stand the TV set with the table or floor stand only on a level, sturdy, 
horizontal base. Particularly ensure that the set does not protrude to the
front when placed in or on pieces of furniture.
Set up the device where it is not exposed to direct sunlight and where it
is not exposed to additional warming through heating elements.
Prevent metal items, needles, paper clips, liquids, wax, or similar items,
from getting into the interior of the device through the vent slots in the
rear panel. Such objects can cause short circuits in the set, which could
possibly cause a fire.
If  something  should  get  into  the  interior of the set then  immediately
unplug the mains plug of the device and contact customer service for
more information.
For your safety
.
10 cm
.
10 cm
10 cm