Manualsbrain.com
  1. Manuels
  2. Marques
  3. Toshiba
  4. 40FT2U
  5. Manuel D’Utilisation

Toshiba 40FT2U Manuel D’Utilisation

Télécharger
Page de 59
Chapter 6: Using the TV’s features
43
Setting the PC Audio
This function allows you to output or mute the sound 
from your PC when connecting using the PC IN 
terminal and an analog RGB cable. ( page 18)
To set the PC Audio:
1無 
Press 
 and open the 
Sound menu.
2無 
Highlight 
Audio Setup and press 
.
3無 
Press  or  to select 
PC Audio and then press 
 or  to select 
No or Yes.
Yes: When viewing the PC input, the audio from 
the PC Audio input can be heard.
No: When viewing the PC input, there will be no 
audio.
Note: 
Because the PC and HDMI-1 inputs 
share the same set of analog audio inputs, 
the PC Audio menu setting influences the 
HDMI 1 Audio
 menu setting. If PC Audio 
is set to “No” the HDMI 1 Audio setting 
changes to “Auto” If PC Audio is set to “Yes” 
the HDMI 1 Audio setting is set to “Digital” 
and is grayed out in the menu. (Also see 
item 3 on page 12 and “Setting the HDMI
®
 
Audio mode” on page 26.)
Using the Media Player
Using the Media Player with USB
You can enjoy photos contents stored on a USB 
storage device.
Photo Viewer specifications:
Data type: JPEG Exif ver2.1
File format: JPEG
Maximum photo size: 6 MB
Maximum number of files: 500 / folder
Maximum photo resolution:  
1366 x 768 pixels (32DT2U / 32DT2UL) 
1920 x 1080 pixels (40FT2U) 
Supported file system:
 
FAT16 and FAT32
Note
:
 
• Gently insert the USB device into the port and 
do not remove while using the Media Player.
 
• USB device: USB Mass Storage Class device 
(MSC)
 
• Support is not guaranteed for all devices.
 
• Connect the USB device directly to the TV.
 
• Do not use a USB Hub.
 
• You must obtain any required permission from 
copyright owners to use copyrighted content. 
Toshiba cannot and does not grant such 
permission.
 
• Depending on the file size and amount in your 
USB storage device, it may take some time to 
load before content is viewable. A message 
will display on-screen when loading files from 
the USB storage device.
 
• Only limited types of U3 USB devices are 
supported. Therefore, it is suggested you 
do not to use U3 USB for the Media Player 
function.
 
• Non-supported characters in the filename will 
be replaced with a square( ).
To select the Auto Start function
1無 
Press 
 and  or  to select the 
Setup menu. 
2無 
Press  to select 
Media Player, and then press 
.
3無 
Press  or  to select 
Auto Start. 
4無 
Press  or  to select 
On or Off. 
(continued)