Toshiba 42LX177 Manuel D’Utilisation
80
LX177 (E/F) Web 213:276
Chapter 7: Using the TV’s advanced features
Using the Film Stabilization feature
This feature helps to eliminate video shaking that can occur
when Cinema Mode is set to Film (3:2 pull down process
enabled).
when Cinema Mode is set to Film (3:2 pull down process
enabled).
To turn on Film Stabilization:
1
Press Y and open the Video menu.
2
Highlight Picture Settings and press T.
3
Highlight Advanced Picture Settings and press T.
4
In the Film Stabilization field, select On.
5
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To revert to the factory defaults, highlight Reset and
press T.
Note:
• If you select one of the factory-set picture modes (Sports,
• If you select one of the factory-set picture modes (Sports,
Standard, Movie, or Document) and then change the Film
Stabilization setting, the picture mode automatically
changes to Preference.
Stabilization setting, the picture mode automatically
changes to Preference.
• When the Cinema Mode is set to Video or the ClearFrame
is set to Off (
- page 79), Film Stabilization will be grayed
out and set to off automatically.
Using CableClear
®
digital noise reduction
The CableClear
®
digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video tape or
disc.
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video tape or
disc.
To change the CableClear settings:
1
Press Y and open the Video menu.
2
Highlight Noise Reduction and press T.
3
In the CableClear field, select your desired setting.
Note:
• If the current input is ANT, VIDEO 1, or VIDEO 2, the
menu will display the text “CableClear.” The available
selections are Off, Auto, Low, Middle, and High.
selections are Off, Auto, Low, Middle, and High.
• If the current input is ColorStream HD1, ColorStream
HD2, HDMI 1, HDMI 2, or HDMI 3, the menu will display
the text “DNR.” The available selections are Off, Auto,
Low, Middle, and High. Auto will react proportionally
to the strength of the noise. Low, Middle, and High will
reduce the noise in varying degrees, from lowest to
highest, respectively.
the text “DNR.” The available selections are Off, Auto,
Low, Middle, and High. Auto will react proportionally
to the strength of the noise. Low, Middle, and High will
reduce the noise in varying degrees, from lowest to
highest, respectively.
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To revert to the factory defaults, highlight Reset and
press T.
Done
Advanced Picture Settings
Mode: Preference
Static Gamma
Reset
Dynamic Contrast
Off
High
Film
Vertical Edge Enhancer
Cool
Color Temperature
Cinema Mode
On
Film Stabilization
On
ClearFrame
0
Video
Picture Settings
Noise Reduction
ColorMaster Pro
xvYCC Selection
Off
Game Mode
Theater Settings
TheaterLock
Off
Off
Mode
Sports
Done
Noise Reduction
ANT
Reset
CableClear
Auto
Low
MPEG Noise Reduction
42LX177_EN.book Page 80 Tuesday, May 15, 2007 1:58 PM