Toshiba 26AV502RZ Manuel D’Utilisation

 

•

If you hear no sound, try setting the 

MTS feature 

to 

Stereo mode ( page 44).

 

•

If you are not receiving a second audio program 
from a known SAP source, make sure the 

MTS 

feature is set to 

SAP mode ( page 44).

 

•

If you hear audio that seems “incorrect” for the 
program you are watching (such as music or a 
foreign language), the SAP mode may be on. Set 
the 

MTS feature to Stereo mode ( page 44).

Remote control problems

 

•

Make sure the remote control is set to the correct 
device mode ( page 21).

 

•

Remove all obstructions between the remote 
control and the TV.

 

•

The remote control batteries may be dead. 
Replace the batteries ( page 20).

 

•

Your TV remote control may not operate certain 
features on your external device. Refer to the 
owner’s manual for your other device to determine 
its available features. If your TV remote control 
does not operate a specific feature on another 
device, use the remote control that came with the 
device ( pages 22–26).

 

•

If the TV still does not act as expected, use the 
Reset Factory Defaults procedure ( page 33).

Channel tuning problems

 

•

Make sure the remote control is set to the correct 
device mode ( page 20).

 

•

The channel may have been erased from the 
channel  memory by the 

Channel Add/Delete 

feature. Add the channel to the channel memory 
( page 30).

 

•

The channel may be blocked by the 

Block feature. Unblock the channel ( page 47).

 

•

If you are unable to tune digital channels, check 
the antenna configuration ( page 29). If you 
are still unable to tune digital channels, clear all 
channels from the channel list ( page 31) and 
reprogram channels into the channel memory 
( page 30). If you are still unable to tune 
digital channels, use the Reset Factory Defaults 
procedure ( page 33). Also see “TV stops 
responding to controls” and “Other problems”  
( page 55).

Closed caption problems

 

•

If the program or video you selected is not closed-
captioned, no captions will display  
( page 42).

 

•

If text is not available, a black rectangle may 
appear. If this happens, turn off the closed caption 
feature ( page 40).

 

•

A closed-caption signal may not display correctly 
in the following situations: a) when a videotape 
has been dubbed; b) when the signal reception 
is weak; or c) when the signal reception is 
nonstandard ( page 40).

Rating blocking (V-Chip) problems

 

•

If you forget your PIN code: While the PIN 
code entering screen is displayed, press 

 

four times within 5 seconds. The PIN code you 
previously stored will be cleared ( page 45).

No REGZA-LINK operation

 

•

The REGZA-LINK feature is available for 
Toshiba REGZA-LINK compatible devices.

 

•

Make sure the HDMI cables with the HDMI Logo 
(

) are used.

 

•

When the connected REGZA-LINK device does not 
work correctly after you have changed settings of 
the device, turn off your TV and unplug the power 
cord, then plug and turn on again.

 

•

If several devices are connected, REGZA-LINK 
feature may not operate properly.

 

•

Read the instruction manual furnished with the 
connected REGZA-LINK device.

HDMI problems

 

•

Make sure to use cables with the HDMI Logo  
(

) ( page 13).

 

•

Some legacy HDMI sources may not work 
properly with the latest HDMI TV products, due 
to new standard adoption.