TTE Technology LE32HDF3010TA Manuel D’Utilisation

Connections and Setup

Setup Wizard

Perform the following steps before you press on the remote
control unit.
• Insert the batteries into the remote control unit.

• Connect the antenna cable to the TV.

• Plug in the AC cord to the AC outlet.
The first time you switch the set on, the

Setup Wizard opens,

which guides you through the setup process.
1. The first step of the setup requires you to select your

preferred language for the menu system. Press ▲/▼ to

select your language, then press

OK to enter the next

screen.

2. A menu screen asks you to set the power on mode.

• Choosing “Home Mode” for the TV assigns the optimal

picture settings for most home environments.

• Choosing “Retail mode”, which is not ENERGY STAR

compliant, sets the unit up with predefined settings for

retail displays. In this setting, the power consumption

may exceed the requirements of the ENERGY STAR®

qualification. Use ▲/▼ to select the desired location

setting (“Home Mode” or “Retail mode”); then press

to continue to the next screen.

Note: if you select “Retail Mode”, a screen menu will

display to ask you go back to the previous menu to select
“Home Mode” by pressing ◄ to select

Go Back and press

OK to confirm , or you can select “Proceed“ to proceed to

the next screen.

3. Use ▲/▼ to select the current local time zone. Press

to continue to the next screen.

4. Select either “Antenna” or “Cable/Sat” as the channel scan

type. Press

OK to begin the channel scan process.

Note: Make sure what kind of connection is made with

your TV when selecting “Antenna” or “Cable/Sat”.

5. The screen will change to show the progress of the channel

scanning process, available channels will be stored in the

TV’s memory.

Note: If you do not want to scan for channels at this time,

you can press

CLEAR or MENU to exit the scanning

process, and perform the channel scan later in the “Setting”

menu.

If you are using a cable set-top box and connect using the

RF connection, you do not have to complete the Channel

Scan. You can simply tune to channel 3 or 4 on the TV,

then use the remote that came with yout cable/satellite

box.

6. When the scanning is finished, the unit will switch to the

first channel found.

Français