Marshall electronic V-R70P-SD Manuel D’Utilisation

V-R70P-SD 

Users Guide

 

Marshall Electronics 

The V-R70P-SD features Marshall’s proprietary TFT-MegaPixel™ display system and represents leading edge technology in LCD 
imaging for broadcast and professional video applications. This is a low cost stand alone monitor and is constructed with a durable 
enclosure featuring an optical grade polycarbonate protective cover for the antiglare/antireflective screen. A V-Mount battery adapt-
er is also included and the monitor can be powered for over 5 hours with a 50WH battery. The 1.2-million pixel TFT screen has 130 
degree viewing angles and incorporates completely digital signal processing to provide image reproduction that exceeds all CRT 
displays available in a similar form factor. All SMPTE/ITU High Definition and Standard Definition digital video standards and signal 
types are accepted and displayed on this model. All video formats are scaled to fit on screen in the highest resolution using a state 
of the art LSI that incorporates 4x4 pixel interpolations with precision Gamma correction to produce the best images available. 
Additional features include, three LED tally, setup memory, Blue Gun, and direct access for all adjustment and selection functions. 

1

2

Capable of displaying more than 900 TV Lines resolution. Standard definition is internally up converted to High 
Definition. All signals remain completely digital to provide the most exact images available.

• SDI (SMPTE-259M)
• Analog Composite PAL/NTSC Auto Detect (BNC with loop out) (SMPTE170M)
• Y/C (S-video) (4 Pin Mini-din with loop out) 

• Protection for all connections and controls with strategically placed ventilation for use in harsh environments

• Optical grade polycarbonate screen cover with Antireflective / Antiglare coating

• Adjustment Settings Memory stored on shutdown and recalled when power is applied

• Use for adjustment to SMPTE color Bars

• For screen testing purposes

• Three LEDs (Red, Green, Amber) produce 7 different tally indications

           

3

4

Use for table top mount

Attaches monitor to camera

Use for viewing in bright lighting or outdoors

Use with Anton Bauer D-type connection

Use with 4 Pin XLR connections

           

2

5

• Users manual
• “Brick” type 12vdc power supply with 4 Pin Female XLR connector
• “V” Mount battery adapter
• ¼”-20 mounting plate 

7

When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean 
micro fiber clothe, or cheese clothe. Do not use paper towels. Paper towel fibers are coarse and may scratch the sur-
face of the Polycarbonate faceplate. Paper towels may also leave streaks on the surface. Antistatic and fingerprint 
resistant cleaning agents are recommended.

1. Unpack the V-R70P-SD and accompanying power supply. Physically inspect for any damage that may have 
occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If 
you are not located within the continental united states call +1 310-333-0606.

2. Connect required cables for signal input and output.
Please note that power must be applied to the V-R70P-SD for the SD/SDI outputs to be activated. All BNC connectors 
should be rated for 75

Ω

..

3. Plug the power supply into the A.C. source 
Please note that power can be supplied from a variety of DC sources, such as batteries or Vehicle power. 
Input power range is 10.7 to 15 Volt D.C. 
In operation, the V-R70P-SD will draw approx. 0.8 amp.
Attach 4 Pin XLR power connection from V-PS12-V-5 power supply to the back of the unit.

4. Turn on the V-R70P-SD by depressing the power switch located on the front of the unit. 

8

9