Avaya P333R-LB Manuel D’Utilisation

Avaya 

P333R-LB User’s Guide

53

Chapter 10

Default Settings of the P330

This section describes the procedures for the first-time configuration of the Avaya 
P330. The factory defaults are set out in detail in the tables included in this chapter.

Configuring the Switch

The Avaya P330 may be configured using the text-based Command Line Interface 
(CLI), the built-in Avaya P330 Device Manager (Embedded Web) or Avaya Multi-
Service Network Manager™.
For instructions on the text-based CLI, see the Avaya P330 Reference Guide.
For instructions on installation of the graphical user interfaces, see Embedded Web 
Manager. For instructions on the use of the graphical user interfaces, refer to the 
Device Manager User’s Guide on the Documentation and Utilities CD.

The default settings for the Avaya P330 switch and its ports are determined by the 
Avaya P330 software. These default settings are subject to change in newer versions 
of the Avaya P330 software. See the Release Notes for the most up-to-date settings.

Function

Default Setting

IP address

149.49.32.134

Subnet Mask

255.255.255.0

Default gateway

0.0.0.0

Management VLAN ID

1

Spanning tree

Enabled

Bridge priority for Spanning Tree

32768

Keep alive frame transmission

Enabled

Network time acquisition

Enabled, Time 
protocol

Time server IP address

0.0.0.0