Avaya P333R-LB Manuel D’Utilisation

Chapter 11

Avaya P330 Layer 2 Features

64

Avaya 

P333R-LB User’s Guide

three available Port Multi-VLAN binding modes are:
•

 - the port is programmed to support the entire 3K VLANs range. 

Traffic from any VLAN is forwarded through a port defined as “Bind to All”. 
This is intended mainly for easy backbone link configuration

•

 - the port supports all the VLANs configured in the 

switch/stack. These may be either Port VLAN IDs (PVID) or VLANs that were 
manually added to the switch.

•

 - the port supports VLANs manually configured on it.

Figure 11.3 illustrates these binding modes in P330.

When a VLAN-tagged packet arrives at a port, only the packets with the  VLAN tag 
corresponding to the VLANs which are configured on the port will be accepted. 
Packets with other VLAN tags will be dropped. 

Static Binding
-

The user manually specifies the
list of VLAN IDs to be bound to the
port, up to 253 VLANs 

-

Default mode for every port

-

Only VLAN 9, and any otherVLANs
statically configured on the port
will be allowed to access this port

Bind to Configured
-

The VLAN table of the port will
support all the Static VLAN
entries and all the ports’ VLAN
IDs (PVIDs) present in the switch

-

VLANs 1,3,5,9,10 coming from
the bus will be allowed access
through this port

-

All the ports in Bound to
Configured mode will support the
same list of VLANs

Bind to All
-

Any VLAN in the range of 1-4094
will be allowed access through this
port

-

Intended mainly for easy backbone
link