VIZIO P42 Manuel D’Utilisation

Version - 2/21/2005 

25 

www.vizioce.com 

 

1.  Plug the power cord into an AC wall socket.  
 
2.  Press the AC switch button on the back of the 

Plasma TV. The POWER indicator on the front 
panel will light orange. 

 

3.  Press the POWER button on the front panel or the 

POWER button on the remote control to power on 
the Plasma TV. The POWER indicator on the front 
panel will light green. 

 
4.  Select input source for the Plasma TV, via either 

OSD menu or remote control. 

 
5.  If connecting to antenna, cable or other RF 

source on TV inputs, see page 30 to configure the 
product to receive all available channels. 

The VIZIO P42 can either be kept on the base stand or mounted to the wall for viewing.  If you 
choose to mount the P42 to the wall, you will need to attach 4 stand-off screws (included within 
the product packaging) to back panel so that the TV will fit evenly against a wall mount.  Please 
follow the instructions below for removing the base stand and adding the stand-off screws to 
prepare the TV to be mounted.   
 
To remove the stand base: 

1.  Unplug all the cables and cords from the Plasma 

TV. 

2.  Place the Plasma TV face down on a soft and flat 

surface (blanket, foam, cloth, etc) to prevent any 
damage to the display. 

3.  Remove the 6 screws on the stand base of the 

Plasma TV and the 2 screws on the upper part of 
the display. 

4.  The stand can now be removed from the back 

panel. 

  

1.  Secure both 55 mm stand-off screws in the screw 

holes on the top side of the back panel.   

2.  Secure both 42 mm stand-off screws in the screw 

holes on the bottom side of the back panel. 

 
The Plasma TV will now fit flush against a Plasma TV 
wall mount.  Please make sure to read the directions of 
your specific wall mount to properly hang the P42.