VIZIO GV47L FHDTV20A Manuel D’Utilisation

VIZIO GV47L FHDTV20A User Manual 

Version 10/16/2007 

33 

 

www.VIZIO.com 

 

For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6. 

 

1.  Connecting the Power Cable 

Connect the power cord to the power cord connector on the back of the LCD HDTV, and then 
plug the power cord into an AC wall socket. 

2.  Connect Audio and Video Cables to the LCD HDTV 

(see pages 18 ~ 31 for detailed steps) 

3.  Turning Power On 

Once all the components are connected, press the Power ON button 
on the side of the LCD HDTV, or press the Power ON (Red) button 
on the remote control. 

4.  Select Input Source 

Select the Input Source for the LCD HDTV by pressing the INPUT 
button on the side of the TV or using the Input button on the remote 
control.  Pressing this button will cycle you through the following 
options: TV, AV1, AV2, Component 1, Component 2, RGB, HDMI1, 
HDMI2, HDMI3 and HDMI4. 

5.  Using DTV and TV with an Antenna or Cable 

If an antenna or cable source is connected to the DTV/TV input, you will need to select TV using 
the INPUT button on the remote control or touch sensor on front right hand side of the LCD HDTV, 
or directly by pressing the TV button on the remote control, and Auto Scan for the available TV 
channels. 

 

 

 

 

       

       

 

 

       

a.  The screen will show ‘snow’ and the first 

Initial Setup OSD panel. 
 
Press the OK button on the remote 
control. 

 

 

 

 

 

 

 

Note: If you do not see this option within the OSD, you might 
have selected the wrong input in the previous steps and you will 
need to repeat step 4 (above) to select the correct input source.