VIZIO L30 WGUe Manuel D’Utilisation
VIZIO L30 WGUe User Guide
Version - 4/7/2005
22
Chapter 3 - Getting Started
3.1 - Turning your LCD TV On and Off
1. Connect the power cord to the
power cord connector on the
back of your LCD TV, and
then plug the power cord into
an AC wall socket.
back of your LCD TV, and
then plug the power cord into
an AC wall socket.
2. Press the POWER button on
the front panel or the POWER
button on the remote control to
power on the LCD TV. The
POWER indicator on the front
panel will light green.
button on the remote control to
power on the LCD TV. The
POWER indicator on the front
panel will light green.
3. Select input source for the LCD TV, via either OSD menu or remote control.
4. If connecting to antenna, cable or other RF source on TV inputs, see page 26 to
configure the product to receive all available channels.
3.2 - Watching a TV program
Before you start watching TV, please make sure that any cable, satellite, or off-air antenna
connections are secure. Also, verify that the power cord is plugged into a correctly grounded
electrical outlet or surge protector.
connections are secure. Also, verify that the power cord is plugged into a correctly grounded
electrical outlet or surge protector.
1. Press the power button on the front of your LCD TV. The status LED on the front turns
green.
2. There are 2 options for selecting your programming:
a) Select TV using the INPUT button on the front of your LCD TV if you are watching a
cable TV box, satellite or off-air antenna.
<OR>
b) Select HDTV using the Input button on the front of your LCD TV if you are watching
b) Select HDTV using the Input button on the front of your LCD TV if you are watching
HD cable or satellite dish.
3. Press the Channel ▼/▲ buttons on the front of your LCD TV to change the channel.
Note: The Channel ▼/▲ buttons on the front of the TV do not work if you are watching a
program using HDTV input.
program using HDTV input.
To make additional adjustments to your LCD TV, please see “Section 3.4 Adjusting Basic LCD
TV Settings” on page 23.
Note: You should be able to see a picture. If you do not, make sure that all connections are
secure and you have selected the correct video input source.
secure and you have selected the correct video input source.
Note: For the best picture quality when connecting a PC through RGB or DVI, set your
product timing mode to VESA 1280 x 768 at 60 Hz. Please refer to the graphic card’s user
guide for additional information on how to set the timing mode.
product timing mode to VESA 1280 x 768 at 60 Hz. Please refer to the graphic card’s user
guide for additional information on how to set the timing mode.