Mitsubishi Electronics 164 SERIES Manuel D’Utilisation

If the picture shape 
seems incorrect, use 
the 

FORMAT key to 

change the picture 
shape.

Press 

FORMAT to cycle through the 

picture shapes available for the 
signal.

The last-used format for the signal 
type will be recalled on the input.
Note:  Also check the aspect 
ratio feature on your cable box or 
satellite receiver as this may be 
altering the picture.

PerfectColor™/ 
PerfecTint™ 
Reset (265 
Series)
(for the single 
input currently 
being watched)

When the color 
intensities seem out 
of balance, use the 
PerfectColor/PerfecTint 
reset to reset the color 
balances to the original 
factory settings.
Both PerfectColor and 
PerfecTint are reset at 
the same time.

While viewing the input to reset, 

press 

MENU and go to Picture > 

Perfect.
Press 

ENTER to display the 

PerfectColor adjustment screen.
Press 

CANCEL to reset the colors.

All PerfectColor/PerfecTint 
sliders are reset to the original 
center position.  The PefectColor/
PerfecTint settings for other 
inputs remain unchanged.

A/V Memory 
Reset
(for the single 
current input)

When audio and/
or video settings for 
a single input seem 
incorrect, use A/V 
Memory Reset to 
return the input to 
the original factory 
settings.

While viewing the input to reset, 

press 

MENU and go to Picture > 

Reset.
Press 

 to highlight 

Reset.

Press 

ENTER again to reset.

All Audio and Video settings for 
the individual input are reset 
except for the global settings 
for audio Balance, Listen To, 
Language, Video Mute, True 120 
Hz.

A/V Reset
(for all inputs)

To reset audio and 
video adjustments for 
all inputs to the original 
factory settings.

While viewing the TV, press the 
control-panel buttons 

INPUT and 

VOLUME DOWN at the same time for at 
least two seconds.

All Audio and Video settings are 
returned to the original factory 
settings, including global settings 
not affected by 

Picture > Reset.

To erase and 
re-memorize channels 
on the 

 input.

Press 

MENU and go to Setup > 

Channel.
Highlight the reception mode, 

e.g. 

Ant Air, and press ENTER.

Highlight 

All Channels and 

press 

ENTER.

Highlight 

Scan.

Press 

ENTER to start channel 

memorization.

All previously memorized chan-
nels for the antenna input are 
erased and a new set of memo-
rized channels is created.  To 
add or delete individual channels, 
see the 

Setup > Channel > Edit 

menu instructions on page 27. 

To change your 

Lock 

menu pass code

See the detailed owner’s guide at www.mitsubishi-tv.com for instructions.

You can resolve many common TV problems using the 
reset functions described in the following table.

IMPORTANT
Before you change sound or picture settings:  If 
picture or sound settings seem wrong for a broadcast 

channel (a channel from the 

ANT input, a cable box, or 

satellite receiver), first check other channels from the 
same input before changing settings.  If most other 
channels from the same input seem correct, there is 
likely a problem with the broadcast rather than with the 
TV.  Use care in this case, as changes you make to fix 
problems on individual channels also affect all other 
channels on the same input.