Benq MK2443 Manuel D’Utilisation

En

gli

sh

1. Connect the VGA output of your PC to the VGA IN terminal on the TV using a mini 

D-Sub (15-pin) cable (not provided).

2. Connect the audio output of your PC to the TV's VGA LINE IN terminal using an 

appropriate 3.5mm-diameter Mini-jack stereo audio cable (not provided).

To view video image from this input, press   INPUT and use ▲▼ button to select VGA 

then press OK button.



 

When you connect the display to a PC, you should adjust the resolution in the display properties 

of the computer to closely match the native resolution of the display (for example, 1680 x 1050 

pixels). See "Supported PC (D-Sub/DVI) input signal resolutions" on page 55 on other supported

resolutions.

PC

Audio cable

Mini D-Sub cable

1. Connect the S-Video output jack on your output equipment to the S-VIDEO jack on 

your display using an S-Video cable (not provided). Pay attention to the pins in the 

plugs when inserting so to keep the pins from bending.

2. Connect the S-Video audio output jack of the output equipment to the AUDIO L/R 

input jacks using a suitable audio cable (or a composite video cable. In this case, the 

yellow plug will not be used).

To view video image from these inputs, press   INPUT and use ▲▼ button to select 

S-Video then press OK button.



 

You should not connect both a composite Video and an S-Video from the same device; just one or 

the other. If you have the choice, use the S-Video instead of composite Video as an S-video signal 

provides a higher quality signal to that of composite Video.

DVD Player

Audio cable

S-Video cable