Epson DH200 Manuel D’Utilisation

5

1.

CAMERA IN: Camera input ports for BNC cameras.

2.

VIDEO OUT: Video output (BNC) to connect the system to a secondary monitor or DVR.

3.

AUDIO IN: One 3.5" RCA port (mono) for recording audio from an audio capable camera (not included).

4.

VGA: VGA port to connect the system to a VGA monitor.

5.

LAN: Connect an Ethernet cable to connect the system to a router or switch (not included).

6.

MOUSE: USB port to connect a USB or PS/2 mouse (PS/2 mouse requires USB adapter).

NOTE: Do not connect a USB flash drive to the "Mouse" port. The USB port on the front panel has been 
specifically designed for high-speed data transfer to a USB flash drive.

7.

ALARM IN: Alarm block to connect external alarm or motion devices (not included).

8.

SPOT OUT: Video output to connect the system to an external monitor (not included). Spot Out mode 
only displays channels switching in an automatic sequence.

9.

AUDIO OUT: One 3.5" RCA port (mono) for audio output.

10. RS422 / 485 / OUT: Connection block for an RS422/485 PTZ camera (not included).

NOTE: The RS232 ports are for development purposes only. A PTZ camera cannot be controlled from 
these ports.

11. DC 12V: Port for 12V DC 3A power supply (included).

12. Exhaust fan: Do not block. Keep clear to allow for proper ventilation.