Epson DH200 Manuel D’Utilisation
65
Remote Setup
DDNS
To configure DDNS options:
1. Under USE, select DEFAULT.
2. Under DOMAIN NAME, enter your
2. Under DOMAIN NAME, enter your
Digimerge DDNS domain name from the
confirmation email.
confirmation email.
3. Under USER ID, enter your
Digimerge DDNS
user name/ID
.
4. Under PASSWORD, enter your Digimerge
DDNS password.
5. Click APPLY and then OK to save your
settings and close the window.
SYSTEM
To configure general system options:
1. Select the GENERAL TAB (default) and
configure the following:
• AUTO KEY LOCK: Select ON/OFF. If ON,
• AUTO KEY LOCK: Select ON/OFF. If ON,
the front panel touch-screen will be
disabled after 3 minutes of inactivity. Enter
your system password (by default, 000000)
to disable
disabled after 3 minutes of inactivity. Enter
your system password (by default, 000000)
to disable
• KEY TONE: Select ON/OFF. If ON (default),
the system will "beep" whenever a button
is pressed on the front panel or remote
control
is pressed on the front panel or remote
control
• OVERWRITE: Select ON/OFF. If ON, the
system will overwrite the earliest
recorded video on the hard disk when the
HDD is full
recorded video on the hard disk when the
HDD is full
• RESOLUTION: From the drop-down menu
select CIF 4CH, FIELD 4CH, FRAME 4CH,
CIF 8CH, FIELD 8CH, FRAME 8CH, or CIF
+ FRAME.
CIF 8CH, FIELD 8CH, FRAME 8CH, or CIF
+ FRAME.
NOTE: Recording must be stopped on the DVR
in order to change the resolution.
in order to change the resolution.
NOTE: Resolution may vary by model.
2. Click APPLY and then OK to save your
settings and close the window.
Figure 38.2 DDNS options
Figure 39.0 System options—General