Lorex Technology DXR116 Manuel D’Utilisation
18
Camera Channel Setup
To access the Camera option, press MENU followed by the 4 digit password. Use the ? / ? to scroll to the Camera option
and press ENTER.
and press ENTER.
TITLE
DWELL
ALARM
RECORD
---01
ON
5
5
5
LOW
EVENT
---02
ON
5
5
5
LOW
EVENT
---03
ON
5
5
5
LOW
EVENT
---04
ON
5
5
5
LOW
EVENT
---05
ON
5
5
5
LOW
EVENT
---06
ON
5
5
5
LOW
EVENT
---07
ON
5
5
5
LOW
EVENT
---08
ON
5
5
5
LOW
EVENT
---09
ON
5
5
5
LOW
EVENT
---10
ON
5
5
5
LOW
EVENT
---11
ON
5
5
5
LOW
EVENT
---12
ON
5
5
5
LOW
EVENT
---13
ON
5
5
5
LOW
EVENT
---14
ON
5
5
5
LOW
EVENT
---15
ON
5
5
5
LOW
EVENT
---16
ON
5
5
5
LOW
EVENT
The options available in this section are as follows…
Title
This feature is used to assign a 6 character title to each camera input.
1. Press ? / ? to select the desired time camera channel (1-16), then press ENTER.
2. Press ? / ? to select the desired character and ? / ? to move to the next character
3. Press MENU to confirm and exit the Title setting.
3. Press MENU to confirm and exit the Title setting.
4. Press MENU again to exit the Camera Setup Option
Dwell
This feature is used to enable or disable the dwell feature for each camera when viewing using the call monitor output.
1. Press ? / ? to select the desired time camera channel (1-16), then press ENTER.
2. Press ? / ? to select the Dwell feature on the screen.
3. Press MENU to confirm and exit the dwell setting.
2. Press ? / ? to select the Dwell feature on the screen.
3. Press MENU to confirm and exit the dwell setting.
4. Press MENU again to exit the Camera Setup Option
Brightness / Contrast / Color
This feature is used to adjust the video settings on each channel.
1. Press ? / ? to select the desired time camera channel (1-16), then press ENTER.
2. Press ? / ? to select the Brightness, Contrast, or Color feature on the screen.
2. Press ? / ? to select the Brightness, Contrast, or Color feature on the screen.
3. Press ? / ? to select 0~9 on the screen.
4. Press MENU to confirm and exit the Brightness, Contrast, or Color control feature
5. Press MENU again to exit the Camera Setup Option
4. Press MENU to confirm and exit the Brightness, Contrast, or Color control feature
5. Press MENU again to exit the Camera Setup Option
Alarm Polarity
This feature is used to select the alarm polarity as LOW / OFF / HIGH.
1. Press ? / ? to select the desired time camera channel (1-16), then press ENTER.
2. Press ? / ? to select the Alarm Polarity feature on the screen.
3. Press ? / ? to select LOW / OFF / HIGH on the screen.
3. Press ? / ? to select LOW / OFF / HIGH on the screen.
4. Press MENU to confirm and exit the Alarm Polarity feature
5. Press MENU again to exit the Camera Setup Option
5. Press MENU again to exit the Camera Setup Option