Maxtor QSNDVR9M Manuel D’Utilisation
Update firmware:
Make sure the updating firmware is on the USB disk
Do not power off the DVR during updating;
Press “ENTER” button to start updating.
Then the system will check the updating firmware
Make sure the updating firmware is on the USB disk
Do not power off the DVR during updating;
Press “ENTER” button to start updating.
Then the system will check the updating firmware
When the updating firmware is found O.K., the system starts to update.
Update process:
Erase the former file;
Check the space for update;
Erase the former file;
Check the space for update;
When the space is ready, the software update starts, the percent of update is on the right. It takes
Page 38
Page 38