Omega Engineering RD8900 Manuel D’Utilisation

 

33

 
 
Press the Config key to enter the Configuration mode.  The following buttons appear: 
Channel, Display, Tools, Instrument, Clock, System Info and Demo. Meanwhile, the 
following soft keys appear at the bottom: Save, Load, Default and Back. 
 
 

 
 
                                                     Figure 4  – 1 
                                                    

 

 
Soft Keys 
 
Enter:  First select the mode by pressing directional keys↑↓← →, then press Enter key to 
enter any mode of Channel, Display, Tools, Instrument, Clock, System Info or Demo.  
 
Save: Save configurations from recorder to storage media CF card. To read the configuration 
and measured data from CF card on a PC for the first time or any time configuration has 
been changed, it is important to press Save key to save configuration changes to CF card 
beforehand. 
 
Load: Load configuration from storage media CF card to recorder. 
 
Default: If the configuration is set incorrectly, Default is a useful key to recall the default 
settings on the analog input card inserted into rear expansion slot. 
 
Back:  Go back to the previous display.