Pelco C1570M-E (4/07) Manuel D’Utilisation
C1570M-E (4/07)
11
PRODUCT SERIAL NUMBER LABEL PLACEMENT
Product serial number labels help Pelco’s Product Support identify your system and its factory configuration in the event that the
CM9700MDD-EVS or its components require service.
CM9700MDD-EVS or its components require service.
A label citing your product’s serial number is attached to the bottom panel of the CM9700MDD-EVS. Because rack mounting or other installation
options may obscure the factory-applied label, two additional labels are provided. Attach one label to your product documentation or another
product location that will not be obscured by installation. The second label is a spare.
options may obscure the factory-applied label, two additional labels are provided. Attach one label to your product documentation or another
product location that will not be obscured by installation. The second label is a spare.
To use the serial number label, complete the following steps:
1. On the bottom panel of the CM9700MDD-EVS, locate the two small labels, attached with a yellow sticker that reads “Extra serial number
labels: remove prior to installation.”
2. Remove the yellow sticker and the labels.
3. Peel away the backing from one label and attach it to this manual, other product documentation, or an unobscured product location.
Figure 4.
Product Serial Number Label