Pelco C4631M Manuel D’Utilisation

C4631M (11/09)

17

The DVR displays a control for operating PTZ cameras. The PTZ option must be configured for each camera to use the PTZ control. 

•

Programming: To program or clear presets, preset tours, and patterns, the SET button must be engaged. While in PTZ programming mode, 
multiple presets can be programmed. 

•

Activating a PTZ feature: To activate presets, tours, and patterns, the SET button must be disengaged. The PTZ option must be 
configured for each camera channel before the PTZ control can be used. For information about setting PTZ options, refer to Normal Record 
Mode on page 30. 

–

The PTZ feature is available to administrator, power, and normal level users.

–

When the PTZ control is displayed, only PTZ operations are available.

–

When a PTZ camera is controlled from the remote client, PTZ operation is not available on the DX4104. Likewise, when a PTZ camera 
is controlled from the DX4104, PTZ operation is not available at the remote client.

–

Instant record is not available when the PTZ control is displayed.

–

The PTZ control has a drag and drop feature.

–

The PTZ control opens in the last location in which it was used.

Refer to PTZ Presets on page 18 and PTZ Control on page 10 for more information. 

1. Click a camera pane. 

2. On the toolbar, click PTZ 

. The PTZ control is displayed.

Figure 10. PTZ Operation

3. Click the number pad on the PTZ control, and then click PRESET. The camera moves to the preset location.