Pelco C4631M Manuel D’Utilisation
C4631M (11/09)
33
INSTANT MOTION RECORD MODE
The unit allows you to manually start and stop the instant recording mode. You can configure each camera to record at a different resolution,
quality, and image rate to capture instant recording video.
quality, and image rate to capture instant recording video.
The DX4104 allows you to configure the following instant recording settings for each camera:
•
Channel: Selects the channel (01 to 04) for configuration.
•
Resolution: Sets the resolution for the channel. The default is 352 x 240.
•
Quality: Sets the picture quality of recorded video: LOWEST, LOW, STANDARD, HIGH, HIGHEST.
•
Image Rate: Sets the image rate. Refer to Table B for more information.
To set up the instant recording mode:
1. From the Camera menu, click Instant Record.
2. Click the Channel box, and select the channel to configure.
3. Click the boxes to enter their settings.
4. Repeat steps 2 and 3 to configure the other channels.
5. Click Close.
6. Click OK.
Table E. Resolution and Image Rate
Resolution
Image Rate
NTSC
352 x 240
1, 3, 5, 7.5, 15, 20, 30
704 x 240
1, 3, 5, 7.5, 15
704 x 480
1, 3, 5, 7.5
PAL
352 x 288
1, 3, 5, 6, 12.5, 20, 25
704 x 288
1, 3, 5, 6, 12.5
704 x 576
1, 3, 5, 6