Pelco C4631M Manuel D’Utilisation
C4631M (11/09)
41
RELAY OUTPUT SETUP
You can configure how the relay output is controlled: alarm acknowledge or post-alarm time. The relay out OFF setting does not control the actual
alarm recording function. Turning off the relay output does not terminate the alarm recording mode.
alarm recording function. Turning off the relay output does not terminate the alarm recording mode.
•
Relay Off:
–
ALARM ACKNOWLEDGE: The relay output feature must be turned off manually.
–
POST-ALARM TIME: Turns off the relay output feature automatically when the post-alarm time expires. This setting is configured
individually for each channel. For information about configuring post-alarm time, refer to Normal Record Mode on page 30.
individually for each channel. For information about configuring post-alarm time, refer to Normal Record Mode on page 30.
•
System Alarm Out: Sets the relay output to either off or on.
To set up the relay output:
1. From the Linking menu, click Output.
2. Click the boxes to enter their settings.
3. Click Close.
4. Click OK.