Toshiba KV-HD01A Manuel D’Utilisation

 

11

 

 

MUX MAIN MONITOR IN Connector:   

 

This BNC connector is used to connect the live video output from a multiplexer to the unit. 

 

VIDEO IN Connector:   

 

This BNC connector is used to connect the video output from a camera or a multiplexer to the 

unit. 

 

S-VIDEO IN Connector: 

 

This connector is used to connect the S-video output from a camera or a multiplexer to the unit. 

 

Terminal Block: 

 

There are 9 exposure contacts on this terminal block including SW. Out, GND, ALM. OUT, FULL, 

REC, ALM RST, GND, and ALM. IN for connecting with external devices. Please refer to the next 

section for details. 

 

Power Switch:   

 

To power the unit on or off.     

 

Plug Outlet: 

 

For connecting with an external power supply. 

 

RS-232 Port: 

 

RS-232 communication port for connecting with an external control device. Please refer to 

APPENDIX 1 for more details.   

 

S-VIDEO OUT Connector: 

 

This provides a S-video signal to a multiplexer. 

 

VIDEO OUT Connector: 

 

This provides a composite video signal to a multiplexer. 

 

MONITOR Connector: 

 

This provides a composite video or a multiplexer’s live signal if connected to a display device. 

    10 BASE-T Connector: 

 

This is a standard RJ-45 connector for 10 Mbps Ethernet networks.