Toshiba KV-DVR Manuel D’Utilisation

 

14 

   

   

   

   

 

Attach the Monitor to the Rear of the DVR unit using the VGA cable supplied by the Monitor Manufacturer. Refer to 
your monitor manual for detailed information on how to setup and use it. 
 

NOTE: The monitor you use must be capable of having a screen resolution of 1024 x 768 and display colors of at least 24 Bit 

 

 
 

 
Attach the AC power cable to the rear of the DVR Unit. See Rear Panel Connectors for more information.  

 

 

To reduce the risk of electrical shock or damage to the equipment: 

    Do not disable the power grounding plug. The grounding plug is an important safety feature. 

    Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. 

    Disconnect the power from the computer by unplugging the power cord either from the electrical outlet or the 

computer. 

 

 

 
 

 

 
There are different types of Video Sources that can be plugged into your DVR unit including DVD players, VHS players, 
and CCTV Cameras. The back of the DVR unit contains up to 16 video inputs depending on the DVR model. The 
connectors use the BNC standard. On the KV-PCDVR32 32 Channel DVR, all 32 of these ports are used as inputs. 

 
 

Video Inputs – The Video inputs are RG-59 BNC connectors. Simply plug one end into your video source (DVD, 
Camera, etc.) and plug the other end into the desired BNC input on the DVR unit.   

 
 

 
When terminating the outputs becomes necessary, the DVR unit has built-in termination that allows you to select 
individual outputs to be terminated.  Generally it is not necessary to terminate the output when using it.  It is dependant 
on if the device to which you are connecting it, has internal 75 ohm termination.  As a rule, if the image appears 
distorted or virtually unviewable, it most likely needs to be terminated.   
 

Not connected to a 
monitor (Normal) 

Connected to a 
monitor  
(Looped) 

 
Always leave the dipswitch set to the ON position when the Looping Outputs are not used.