Toshiba 8GHO44-88 Manuel D’Utilisation

 

12

   

   

 
 

– The Video inputs are RG-59 BNC connectors. Simply plug one end into your video source (DVD, 

Camera, etc.) and plug the other end into the desired BNC input on the DVR unit.   

 
 

 
When terminating the outputs becomes necessary, the DVR unit has built-in termination that allows you to select 
individual outputs to be terminated.  Generally it is not necessary to terminate the output when using it.  It is dependant 
on if the device to which you are connecting it, has internal 75 ohm termination.  As a rule, if the image appears 
distorted or virtually unviewable, it most likely needs to be terminated.   
 

Not connected to a 
monitor (Normal) 

Connected to a 
monitor  
(Looped) 

 
Always leave the dipswitch set to the ON position when the Looping Outputs are not used. 

 

 

 
Each DVR unit may have up to 16 Sensor inputs. These inputs can be used with devices such as Infrared devices, 
motion devices, glass breakage alarms, door and window trips, and many more. The Sensors can be set to Normally 
Open or Normally Closed inside the software.  
 
There are 4 Commons (-) and 16 inputs (+). There is no power supplied to the ports so an external power supply must 
be used if power becomes necessary.

 

 
 
 
   

• 

Normally Open or Normally Closed option is available inside the DVR Software. 

• 

There is no power supplied to the ports. Use an external power supply if necessary. 

 

COM 

Sensor (1 ~ 16)