Toshiba 8GHO44-88 Manuel D’Utilisation

 

40

 

– The Image Port is the port used to transfer the video to the Remote Software. If connecting 

through a firewall, this port must be opened to incoming and outgoing traffic.  

  

– The Search Port is the port used to transfer the Search information to the Remote Software. If 

connecting through a firewall, this port must be opened to incoming and outgoing traffic. 

 

 – Enables the use of the IDVR Web interface as well as defines users who can access it. 

– This option allows you to view the IP configuration of the DVR. 

  

– This option is used to throttle the bandwidth on the DVR. This option is based on 

percentages of images sent across. 

– Defines the modem and PPP information to dial to a remote client when the 

Emergency Agent Event is activated.  

– This option enables the two-way audio functionality and allows you to specify which port the 

connection will use.  

 
The Two-Way Audio feature allows a computer running the Remote software to connect to a DVR and communicate to 
each other. This feature requires a Microphone and a Speaker at both the Remote side and Server side.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The remote client always initiates the connection. The DVR sits waiting for a request from the remote.  
 

 
1)  Enable the ‘ENABLE AUDIO CONNECTION’ checkbox inside SETUP>NETWORK. 

If you are running this feature for the first time see ACTIVATING A 2-WAY AUDIO CONNECTION FOR THE FIRST 
TIME following this section. 
 
1)  Press the 2 WAY AUDIO button from the main screen. 

 
 

2)  If you are running this feature for the first time see the ACTIVATING A 2-WAY AUDIO CONNECTINO FOR THE 

FIRST TIME section following this section. 

3)  Press the DISCONNECT button to Disconnect the 2-Way Audio.