Toshiba 8GHO44-88 Manuel D’Utilisation

 

77

 

 
To Backup video files to a CD-RW drive, or to a Hard Drive, follow these steps: 
 

1. 

From the Main Display Screen select the BACKUP button.  
The Backup Options window displays. 

2. 

From the Backup Options window, use the calendar to select a date. 

3. 

Select the time(s) to backup by clicking on the desired blocks.  The blocks  
will turn red when selected. To deselect the blocks, click on them again. 

4. 

To backup to CD media, insert a blank CD and follow the instructions for formatting a blank disk outlined in this 
chapter. Click on the corresponding CD-R/W drive that is displayed inside the Select Backup Media box and when 
prompted indicate the number of CDs needed to store the backup video (e.g. 980MB of video / 600MB of storage 

per disk = 1.63 so 2 disks would be needed) . Click the 

 button. 

 
To backup to a hard drive, check the box for Fixed HDD.  Select the correct hard drive from the Select Backup 

Media box, then press the 

 button. 

 

If the amount of video exceeds the storage capacity of the media being used then an error message will be displayed 
inside the error message box.  If this happens, reduce the amount of video that is being exported, increase the 
compression, select another media device, or span the file over multiple disks/drives. 

Once the 

 button is pressed, the Backup Options window will close. 

The status of the recording process can be monitored by viewing the Backup Progress bar. This can be seen on the Main 
Display screen. 

The Backup will be completed successfully when the Backup Progress Bar disappears from the Main Display Screen.