Toshiba D-R17DTKB Manuel D’Utilisation

EN

74

U / D], 

U / D], then 

U / D], then press [ENTER/OK].

Set the screen saver time delay.

U / D], then 

Your setting is activated.

Set the front panel display brightness.

U / D], then 

You can choose one from “Auto”, “Bright” or 
“Dark”.
If “Auto” is selected, the display gets dark when 
the power is off.

U / D], 

U / D], then 

U / D], then press [ENTER/OK].

For 2., refer to page 44.

You can select the TV aspect ratio to match the 
formats of what you are playing back with the unit and 
your TV screen (4:3 standard or 16:9 widescreen TV).

U / D], then press [ENTER/OK].

If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on 
the top and bottom of the TV screen when playing 
back a wide-screen picture. Select “4:3 Pan & Scan” 
for a full height picture with both sides trimmed when 
playing back wide-screen picture.

If you have a widescreen TV:
Select “16:9 Wide”.

This unit is compatible with the Progressive Scan 
System. The feature provides you with the higher 
definition images than the traditional output system 
does. You can enjoy Progressive Scan image by 
using HDMI OUT or COMPONENT VIDEO OUTPUT. 
To utilise the Progessive Scan system through the 
COMPONENT VIDEO OUTPUT, you must set Video 
Output mode in the Setup menu by following the steps 
on next page. “SCART (RGB)” is selected as the 
default.

69_77_Function Setup_EN.fm  Page 74  Friday, July 13, 2007  5:36 PM