Toshiba 1805 Manuel D’Utilisation
52
Getting Started
Setting up your computer
Setting up your computer
Connecting a mouse
You may want to use a mouse or trackball instead of the
computer’s built-in TouchPad. Your notebook computer supports
USB and PS/2-compatible pointing devices.
computer’s built-in TouchPad. Your notebook computer supports
USB and PS/2-compatible pointing devices.
The TouchPad
®
can remain operable, even if you connect a
secondary pointing device to the computer. For more information,
see
see
.
Using a USB mouse
1
Connect the mouse cable to the USB port.
2
Install the vendor supplied software that came with the
mouse, if needed.
mouse, if needed.
Using a PS/2 mouse
The system cannot detect a PS/2 mouse if you connect it after
starting the computer.
starting the computer.
NOTE: If you connect a PS/2 mouse to the computer while it
is in Standby mode, you will not be able to use the mouse
when you turn the computer on.
is in Standby mode, you will not be able to use the mouse
when you turn the computer on.
CAUTION: When connecting any PS/2 device, turn off your
computer to prevent any possible hardware damage.
computer to prevent any possible hardware damage.
1
Attach the PS/2 mouse cable to the PS/2 port.
2
Refer to your mouse documentation for configuration steps.