Precor EFX 885 Manuel D’Utilisation

Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835



Begin installation of all fasteners by hand, then partially

tighten them. Do not fully tighten fasteners until

instructed to do so.
Important: When wrench-tightening the screws, make sure

the head of the fastener is parallel to the product surface. If it

is not, stop tightening to avoid cross-threading. To avoid

further damage, stop assembly work and contact Customer

Support.

Installation Requirements

Prior to assembly, make sure you have the required tools and

hardware.

Hardware Kit (not to scale)

The hardware kit shipped with this equipment contains the

fasteners and other hardware components shown in the

following table. Before you begin assembly, make sure that

your hardware kit is complete. If not, please contact Precor

Customer Support.

Fasteners

Quantity

Hex head screws
(1¹₄-inch)

Flat washers
(⁵₁₆-inch)

Flat washers
(³₈-inch)

Split washers
(⁵₁₆-inch)

Phillips-head cap
screws (³₄-inch)

Socket head cap
screws (⁵₁₆–inch x �
1¹₄

–inch)